Безжичен дистанционен превключвател 433mhz DC 36V 24V 12V 1CH реле приемник за научаване на код от предавател за врата и електронна врата

Wireless Remote Control Switch е устройство, което позволява безжично управление на електронни врати и портали чрез използване на 433mhz радиосигнал и научаване на код от предавател.

Сравни

12,06 лв.

Сравни

Описание

Безжичният дистанционен превключвател 433MHz е устройство, което се използва за управление на врати и електронни врати. Той работи на напрежение от 36V, 24V или 12V и има един канал за реле приемник. Устройството може да научи код от предавател, който се използва за отключване и заключване на вратата или електронната врата. Това позволява на потребителя да управлява вратата от разстояние, без да е необходимо физическо присъствие. Безжичният дистанционен превключвател е удобен и лесен за използване, като предоставя удобство и сигурност при достъп до вратата или електронната врата.

  • Support APP: No
  • Frequency: 433 MHz
  • Channel: 1
  • Package: No
  • Model Number: 433mhz remote control transmitter
  • Wireless Communication: RF
  • Use: Universal,Lighting,Electric Door,Automated curtains,SWITCH
  • Brand Name: kebidu
  • Origin: Mainland China
  • Item Type: Switches
  • Switch Type: Remote Control
  • Model Number: 12V 24V 36V receiver controller
  • Input voltage: 12V-36V
  • Working current: 10A
  • Feature 1: 433Mhz Universal RF Remote Control Switch
  • Feature 2: For universal garage door Light LED Fanner motor Signal transmission
  • Feature 3: 1CH Relay Receive
  • Feature 4: For Garage Door Gate Motor
  • Feature 5: For Family, Farm, Factory, Office, Supermarket

DC 12V-36V

Input Voltage: 12 V-36V , RF working mode: Superheterodyne
Receiver sensitivity: > 97 dbm
Remote storage: 250
Support remote type: EV1527 learning code

Remote programming

Working mode:

1. Inching mode: press the remote control the relay will connect, and then release the remote control to disconnect the relay;

2. Self-locking mode: press the remote control the relay will connect, and then press the remote control again to disconnect the relay;

3. Interlock mode: press the remote control key A to connect the relay, and press the remote control key B to disconnect relay.

4. Delay mode: press the remote control the relay will connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Press the code pairing button on the control panel once, and the LED indicator will flash once. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

2. Self-locking learning method:

Press the code pairing button on the control panel twice, and the LED indicator will flash twice. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

3. Mutual lock learning method:

Press the code pairing button on the control panel three times, and the LED indicator will flash three times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

4. 5S delay learning method:

Press the code pairing button on the control panel four times, and the LED indicator will flash four times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

5. 10S delay learning method:

Press the code pairing button on the control panel five times, and the LED indicator will flash five times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

6. 15S delay learning method:

Press the code pairing button on the control panel six times, and the LED indicator will flash six times. After the LED indicatorlit, press the button you need to pairing on the remote control, the LED indicator on the control panel will flash for 3 times which means the pairing succeed.

-Clearing the code :

Push the learning button on the receiver 8 times , the codes will be reset.

After clearing the code, remotes will be need to be recalibrated


 

DC 12V

Product characteristics

(1) Working frequency: 433MHz;

(2) Working mode: jog mode, self-locking mode, interlock mode, delay mode;

(3) Output method; Terminal blocks;

(4) Demodulation method: ASK;

(4) Shell material: ABS;

(5) Control method: ordinary same frequency remote control;

(6) Product size: 34.5 * 29.5 * 17.1mm (excluding shell);

(7) Product weight: 14.88g (excluding shell).

Operating Function Description

(1) Code learning operation

Inching learning code: After the controller is connected to the power, briefly press the learning code button (the light flashes once), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful learning code, and the working mode is inching mode.

Self locking code learning: After the controller is connected to the power, briefly press the code learning button twice (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic mode.

Interlocking code learning: After the controller is connected to the power, briefly press the code learning button three times (press once to flash the light once), and then long press and hold one button on the remote control for 3 seconds (such as key A). The controller indicator light flashes and remains on, and then press another button on the remote control (such as key B). The controller indicator light flashes to indicate successful code learning, and the working mode is interlocking mode (such as AB interlocking).

Delay for 5 seconds to learn code: After the controller is connected to the power, briefly press the learn code button four times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 5 seconds.

Delay of 10 seconds for learning code: After the controller is connected to the power, briefly press the learn code button five times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful learning code, and the working mode is automatic shutdown mode with a delay of 10 seconds.

Delay for 15 seconds to learn code: After the controller is connected to the power, briefly press the learn code button six times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 15 seconds.

Delayed code learning by 20 seconds: After the controller is connected to the power, briefly press the code learning button seven times (once the light flashes), and then long press the remote control button for 3 seconds. The controller indicator light flashes to indicate successful code learning, and the working mode is automatic shutdown mode with a delay of 20 seconds.

(2) Clear code operation

Press and hold the learn code button on the controller for 5 seconds until the indicator light flashes, indicating successful code clearing.

(3) Clear code operation

Jog mode: After learning the code for a single button on the remote control, press the button relay to engage, and release the button relay to disconnect.

Self locking mode: After learning the code for a single button on the remote control, press the button relay once to engage and then press the button relay again to disconnect.

Interlock mode: After learning the codes for the two buttons on the remote control, press the A key to activate the relay, and press the B key to deactivate the relay.

Delay mode: After learning the code for a single button on the remote control, press the button relay to engage, and after the delay, it will automatically disconnect.


Reviews (0)

0.0
0
0
0
0
0

Be the first to review “Безжичен дистанционен превключвател 433mhz DC 36V 24V 12V 1CH реле приемник за научаване на код от предавател за врата и електронна врата”

There are no reviews yet.

0
Безжичен дистанционен превключвател 433mhz DC 36V 24V 12V 1CH реле приемник за научаване на код от предавател за врата и електронна врата
Безжичен дистанционен превключвател 433mhz DC 36V 24V 12V 1CH реле приемник за научаване на код от предавател за врата и електронна врата
12,06 лв.
1PCS DC 12V-36V
1PCS DC 12V-36V
- +